Gtp-U Service Configuration - Cisco ASR 5x00 Home eNodeB Administration Manual

HeNB-GW Service Configuration Procedures
ipsec transform-set <ipsec_transform_set_name>
exit
ikev2-ikesa transform-set <ikesa_transform_set_name>
exit
crypto template <crypto_template_name> ikev2-dynamic
authentication remote eap-profile <eap_profile_name>
ikev2-ikesa transform-set list <ikesa_transform_set_name>
payload <crypto_template_payload_name> match childsa match ipv4
ip-address-allocation dynamic
Notes:
 <
ctxt_name
 <
eap_profile_name
Authentication Profile (EAP) Name.
 <
ipsec_transform_set_name
Association Transform Set. It is a string of size 1 to 127.
 <
crypto_template_name
 <
crypto_template_payload_name
name is unique to the Crypto Template. It is a string of size 1 to 127.

GTP-U Service Configuration

Use the following example to configure the GTP-U service parameters to provide GTP-U tunnel over S1-U interface.
The two GTP-U
configure
context <dest_ctxt_name> -noconfirm
gtpu-service <gtpu_svc_access> -noconfirm
bind address { ipv4-address | ipv6-address } <ip_address>
end
configure
context <dest_ctxt_name> -noconfirm
gtpu-service <gtpu_svc_network> -noconfirm
bind address ipv4-address <ip_address>
> is the context name on which unique EAP name is to configured.
> is a string of size 1 to 128 which configure the context level unique Extensible
> configures the context level name to be used for the IKEv2 IKE Security
> configures the name of the Crypto Template. It is a string of size 1 to 104.
> is the name of the Crypto Template Payload being configured. This
Cisco ASR 5x00 Home eNodeB Gateway Administration Guide ▄
HeNB-GW Service Configuration ▀
41