Logging Facility Configuration - Cisco ASR 5x00 Home eNodeB Administration Manual

▀ Logging Facility Configuration

Logging Facility Configuration
Use the following example to configure the HeNB-GW system to enable the logging and debug facilities for HeNB-GW
subscriber and related protocols.
Important:
system monitoring that allows the user to monitor the events and logging. commands that configure
additional logging facilities are provided in the Exec Mode Command chapter of Command Line Interface
Reference.
logging filter active facility henbapp level { critical | error | warning | unusual |
info | trace | debug }
logging filter active facility henbgw level { critical | error | warning | unusual | info
| trace | debug }
logging filter active facility henbgwdemux level { critical | error | warning | unusual |
info | trace | debug }
logging filter active facility henbgwmgr level { critical | error | warning | unusual |
info | trace | debug }
configure
logging console
logging display event-verbosity {min | concise | full}
logging filter runtime facility henb-gw level { critical | error | warning | unusual |
info | trace | debug }
logging filter runtime facility henbapp level { critical | error | warning | unusual |
info | trace | debug }
logging filter runtime facility henbgwdemux level { critical | error | warning |
unusual | info | trace | debug }
logging filter runtime facility hnbmgr level { critical | error | warning | unusual |
info | trace | debug }
logging filter runtime facility sctp { critical | error | warning | unusual | info |
trace | debug }
logging filter runtime facility threshold { critical | error | warning | unusual | info
| trace | debug }
Important:
▄ Cisco ASR 5x00 Home eNodeB Gateway Administration Guide
44
This section provides the minimum instruction set for configuring logging facilities for
Refer System Administration Guide for more information on logging facility configuration.
HeNB-GW Service Configuration Procedures