Adjusting The Volume; Selecting A Zone And Channel - Kenwood TK-2170 Instruction Manual

To enter the password using the DTMF keypad:
1 Press the DTMF keys corresponding to the password.
• Press the A or # key to delete an incorrect character.
Press and hold the A or # key to delete all entered
characters.
2 Press the S or
• If you enter an incorrect password, an error tone sounds
and the transceiver remains locked.
A
DJUSTING THE
Rotate the Power switch/ Volume control to adjust the
volume. Clockwise increases the volume and counter-
clockwise decreases it.
S Z
ELECTING A
Select the desired zone using the selector or the keys
programmed as Zone Up/ Zone Down.
Select the desired channel using the selector or the keys
programmed as CH/GID Up/ CH/GID Down.
Names can be programmed for zones and channels with up to
8 characters each. Your dealer can set the zone name to a
length of 0 to 8 digits. Channel names will shorten
appropriately, to fit in the 8-digit display.
For example, if the channel name is "GRP 1" and the zone
name is "KENWOOD", and your dealer sets the zone name to
3-digits, the following display will appear:
Press the key programmed as Display Character to toggle
the display between the zone and channel number and the
zone and channel name.
16
key to confirm the password.
V
OLUME
C
ONE AND HANNEL