Receiving A Selcall - Kenwood TK-2170 Instruction Manual

• Press and hold the 0 key to enter a Group digit.
• Alternatively, press and hold the S or
List mode. With the Selcall List activated, you can select the
desired station by rotating the selector. Press and hold the
Side 1 key to toggle the display between the station name
and the list number.
3 Press the S or
Note: Additionally, you can also use the keys programmed as Digit
1x Down, Digit 1x Up, Digit 10x Down, and Digit 10x Up keys to
adjust the Selcall number. Digit 1x Up/Down increases/decreases
the Selcall number by 1 each time the key is pressed. Digit 10x Up/
Down increases/decreases the Selcall number by 10 each time the
key is pressed.
R S
ECEIVING A
When you receive a signal containing the correct tones,
squelch opens and you will hear the call.
• The LED indicator flashes orange and the received Selcall
appears.
• To mute the speaker after squelch opens, press the key
programmed as Monitor.
• Your dealer can program the monitor function to close again after
a specific time period elapses.
• If Transpond for 5-tone Signaling is programmed, an
acknowledgment signal is returned to the calling station.
• If Call Alert for 5-tone Signaling is programmed, an alert tone will
sound when the correct tones are received.
• Your dealer can program the transceiver to display the received
Selcall.
To respond to the call, press the PTT switch and speak into
the microphone.
key to complete the entry.
ELCALL
key to enter Selcall
23