Customizing Scan To Usb - Samsung SL-C460FW User Manual

Using USB memory device

Customizing Scan to USB

You can specify image size, file format, or color mode for each scanning to USB
job.
1 Select (scan) > (Menu) > Scan Feature > USB Feature on the
control panel.
2 Select the setting option you want appears.
• Original Size: Sets the image size.
• Original Type: Sets the original document's.
• Resolution: Sets the image resolution.
• Color Mode: Sets the color mode. If you select Mono in this option,
you cannot select JPEG in File Format.
• File Format: Sets the file format in which the image is to be saved. If
you select JPEG in this option, you cannot select Mono in Color
Mode.
• Darkness: Sets the brightness level to scan an original.
Select the desired status you want and press OK.
3
Repeat steps 2 and 3 to set other setting options.
4
Press (Stop/Clear) to return to ready mode.
5
You can change the default scan settings. Refer to the Advanced Guide.
25
Printing from a USB memory device
You can directly print files stored on a USB memory device.
File s supported by Direct Print option.
• PRN: Only files created by provided driver with your machine are
compatible.
If you print PRN files created from other machine, the printout would be
different.
• TIFF: TIFF 6.0 Baseline
• JPEG: JPEG Baseline
• PDF: PDF 1.7 or lower version
To print a document from a USB memory device
1 Insert a USB memory device into the USB memory port on your machine,
and then press Direct USB.
2 Select USB Print.
2. Menu Overview and Basic Setup
69