Updating Firmware; Update The Firmware By Using The Usb Port - Samsung CLP-680 Series Service Manual

4.1.7. Updating Firmware

This chapter includes instructions for updating the printer firmware. You can update the printer firmware by using one
of the following methods :
•

Update the firmware by using the USB port.

•
Update the firmware by using the Network.
4.1.7.1. Update the firmware by using the USB port
Upgrading preparations
•
CLP680DW_UpgradeJig.exe
•
CLP680DW_V4.00.01.51.exe
Upgrade Procedure
REMEMBER
Please follow the procedures carefully
1) Make sure that the machine is connected to the PC with a USB cable or Network
2) Execute CLP680DW_UpgradeJig.exe And then patch rom will be download on the machine via USB or Network port.
3) Please wait until green LED is ON.(About 1~2 minute)
4) Execute CLP680DW_V4.00.01.51.exe
5) Please wait until the machine is reboot.
NOTE
If the firmware version is V4.xx.01.49 and more higher, Please run a CLP680DW_V4.00.01.51.exe only. (Need NOT a
UpgradeJig.exe)
Copyright© 1995-2013 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-17