Samsung SL-C460FW User Manual page 150

Installing driver over the network
Command- line Definition
/p"<port name>" or Specifies printer port.
/P"<port name>"
Network Port will be
created by use of
Standard TCP/IP
Port monitor. For
local port, this port
must exist on
system before
being specified by
command.
/a"<dest_path>" or Specifies destination path
for installation.
/A"<dest_path>"
The destination
path should be a
fully qualified path.
/n"<Printer name>" Specifies printer name.
or Printer instance shall be
created as specified printer
/N"<Printer name>"
name.
Description
Printer port name can be
specified as IP address,
hostname, USB local port
name or IEEE1284 port
name.
For example:
• /p"xxx.xxx.xxx.xxx" in
where, "xxx.xxx.xxx.xxx"
means IP address for
network printer. /
p"USB001", /P"LPT1:", /
p"hostname"
Since machine drivers
should be installed on the
OS specific location, this
command applies to only
application software.
With this parameter, you
can add printer instances as
your wishes.
Command- line Definition
/nd or Commands not to set the
installed driver as a default
/ND
machine driver.
/x or Uses existing machine
driver files to create printer
/X
instance if it is already
installed.
/up"<printer Removes only specified
name>" or printer instance and not the
driver files.
/UP"<printer
name>"
Description
It indicates installed
machine driver will not be
the default machine driver
on your system if there are
one or more printer drivers
installed. If there is no
installed machine driver on
your system, then this
option won't be applied
because Windows OS will
set installed printer driver as
a default machine driver.
This command provides a
way to install a printer
instance that uses installed
printer driver files without
installing an additional
driver.
This command provides a
way to remove only
specified printer instance
from your system without
effecting other printer
drivers. It will not remove
printer driver files from your
system.
2. Using a Network-Connected Machine
150