GE EER2000 Owner's Manual page 26

Before YouCall ForService...
Troubleshooting tips
Possible Causes What To Do
Oven light does Light bulb is loose or defective. " Tighten or replace tile bull).
not work
Switch operating
• Call tbr service.
light is broken.
Oven will not work Plug on range is not " Make sure electrical plug is plugged into a live, properly
completely inserted in grounded outlet.
the electrical outlet.
A fuse in your home may • Replace tile filse or reset tile circuit breaker.
be blown or the circuit
breaker tripped.
Oven controls improperly set. • See tile Using the oven section.
Door left in the " If necesszuT, allow tile oven to cool then unlock
locked position, tile do,)r.
Food does not bake Oven controls improperly set. • See tile Using the oven section.
or roast properly
Shelf positlon is incorrect or '* See tile Using the oven section.
the shelf is not level.
Incorrect cookware or " See the Using the oven section.
cookware of improper
size being used.
Oven thermostat needs • See the Adjust the oven thermostat--Do it yourself!
adjustment, sol'lieu.
Food does not Oven controls improperly set. " Make sure you turn tile knob all tile way to tile
bmilproperly BROIL posidou.
Door not open to the
• See tile Using the oven section.
broil stop position as
recommended.
Improper shelf position • See the Broiling Guide
being used.
Cookware not suited " Use tile broiling pan and grid that came with your range.
for broiling.
Aluminum foil used on the • See tile Using the oven section.
broiling pan and grid has
not been fitted properly and
slit as recommended.
)
In some areas the power * l reheat tile broil element
tbr l 0 minutes.
(voltage) may be low.
• Broil for tile longest period of time recommended in
tile Broiling Guide.
Oven temperature Oven thermostat • See tile Adjust the oven thermostat--Do it yourself!
too hot or too cold needs adjustment, section.
2C