GE EER2000 Owner's Manual page 18

Usingthe self-cleaning oven.
OFF
START/
II TIME /
w ON/OFF J
How to Delay the Start of Cleaning
Make sure the clock shows tile correct
time of (by.
[] I,atch the door,
[] Turn the ()yen Tempecanne knob
to CLEAN.
On some models, y{)u must push tile
knob in befi)re turning.
[] Pressthe START TIME ON/OFF pad.
[] Pressthe HOURand MIN. pads to set
tile time (leaning _fill start.
When the CLEANlight flashes, slide
the latch handle to the left as tiu as it
will go and turn tile Oven Temperature
knob to OFF
HOUR MIN.
After a Clean Cycle
You tllay notke some white ash in
tile
oven. Wipe it up xdth a &ltnp doth after
tile oven cools.
If white spots remalh, remove them with a soap-
filled steel wool pad and rinse thoroughly with a
wnegarand water mlkture.
These deposits are usually a salt residue
that _annot be retnoved by tile clean ()_(le.
If the oven
is
not (lean af/er one (lean
<)_< le, repeat tile <)_< le.
You _annot set tile oven for cooking
until tile oven is cool enough for tile
door to be unlatched.
:, While tile oven is seltqleaning, y{)u
can press tile CLOCK pad to display
the time ofday. To return to the clean
countdox_ll, press the COOKT/ME
ON/OFF pad.
:, If the shelves become h_ud to slide,
apply a small am{)unt ofvegelable oil or
cooking oil to a paper towel and wipe
the edges of the oven shelves with the
paper towel.