Cleaning The Shuttle Race And Feed Dogs; Oiling The Machine - Kenmore 385.16227300 Owner's Manual

Cleaning the Shuttle Race and Feed Dogs
[] Unplug the machine and remove the presser foot and
needle_ Open the face cover to allow room to remove the
needle plate screw with a screwdriver, Remove the needle
plate(_) and take out the bobbin,
¢_ Needle plate
[] Lift up the bobbin holder(_) and remove it,
(_ Bobbin holder
[] Brush out dust and lint inside the bobbin holder,. Clean
the feed dogs(_)and hook race@ with a lint brush_ Wipe
out gently with a soft, dry cloth,
(_ Feed dogs
@ Hook race
[] Line up the triangle marks@ and position the bobbin
holder, so that the notch fits next to the stopper(_in the
hook racer
(_ Line up the triangle marks,
(_ The notch fits next to the stopper
Oiling the Machine
Unplug the machine,, Open the face cover and oil the two
points, as shown, at least once a yearn One or two drops of
oil is sufficient, Remove excess oil, otherwise it may stain the
fabric,, In case the machine has not been used for a long
period, oil it before sewing Use quality sewing machine oil,
[]
[]
[]
f
®
®
J
98