How To Adjust Buttonhole Stitch Density - Kenmore 385.16227300 Owner's Manual

Ifthe button is extremely t hick,makea testbuttonhole,.
If it is difficult t ofit thebutton through thetestbuttonhole,
lengthen t he buttonhole b ypulling thebuttonholder b ackto
createa gap(_ .
6) Gap
, How to adjust buttonhole stitch density
Slide the stitch length control to adjust stitch density,
Slide the stitch length control to I for a looser density(_).
Slide the stitch length control to 0 25 for a tighter density
®,
f
® O
STRETCH
!r
(,
J
If the sides of the buttonhole are not balanced, do the
following:
• If the buttonhole looks like @, use the screwdriver to
move the lever to the right (+) to make the left side
of the buttonhole less dense (see illustration).
• If the buttonhole looks like ®, use the screwdriver to
move the lever to the left (-) to make the left side of the
buttonhole denser,
(_ Buttonhole pitch balance adjusting lever
f
®
®
AUTOBH
82