Topstitching; Quilting - Kenmore 385.16227300 Owner's Manual

Topstitching
(_ Stitch selector:
(_) Stitch width:
3(3(_ Stitch length:
(_ Needle thread tension:
(_ Presser foot A:
(_ Presser foot H:
6to 8
65
Red zone
2to6
Zigzag foot
Straight foot
NOTE;
When using the straight stitch foot, make sure to use the
center needle position, otherwise the needle may strike
the presser foot and possibly break.
Topstitching emphasizes lines of garments and keeps
seams and edges flat and crisp° Accent suits or blouses
with one or two rows of topstitching around the outer edges
of cuffs, lapels or collars. Lower the presser foot and keep
the edge of the fabric next to the right edge of the presser
foot°
Evenly guide the fabric along the edge to produce an even
row of topstitching 3/8" (1.0 cm) from the edge.
Quilting
(_ Stitch selector: 6 to 8
_} Stitch width: 6°5
(_ Stitch length: Red zone
(_ Needle thread tension: 2 to 6
(_ Presser foot A: Zigzag foot
(_ Presser foot H: Straight foot
NOTE:
When using the straight stitch foot, make sure to use the
center needle position, otherwise the needle may strike
the presser foot and possibly break.
Use the seam guide lines on the needle plate, and the free-
arm, to help determine the distance between quilting
stitches. The quilter will help keep the stitching line straight.
[] Loosen the quilter holding screw.
Slide the quilter in the hole to the desired width and
tighten the screw°
[] Sew, guiding the quitter over the previous row of
stitching.
(_ Quilter holding screw
(_) Quilter
(_ Hole
® Distance
f
f
F
@
1 1
1 t
®
i
I
4'
(
_Tr_TCJ, LE,I_4
(
® ®
%Or_o
OLI
@
I I I
I I I
(
® ® ®
Or%ouO
\
J
J
40