Duerkopp Adler 550-867 Service Instructions Manual page 51

3 Lubrication
Caution: Risk of injury!
Oil can cause skin rashes.
Avoid longer skin contact.
After contact wash yourself thoroughly.
ATTENTION!
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect your environment.
Be careful not to spill any oil.
To lubricate the sewing unit use only DA 10 lubricating oil or an
equivalent oil with the following specifications:
–
Viscosity at 40° C:
–
Ignition point :
DA 10 is available from DÜRKOPP ADLER AG retail outlets under the
following parts number:
250-ml Container:
1-liter Container:
2-liter Container:
5-liter Container:
1
Lubrication of the machine head
–
The sewing machine is equipped with a central oil wick lubrication.
All bearings are supplied by the oil reservoir 1.
–
The oil level must not drop below the marking "MIN".
–
Fill up oil up to the marking "MAX" through the drill-holes in the
inspection glass.
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
47