Feed Dog Height - Duerkopp Adler 550-867 Service Instructions Manual

2.3.5

Feed dog height

14
2
Caution: Risk of injury!
Turn off the main switch.
Check and set the height of the feed dog only when the machine is
switched off.
Standard checking
For a safe forward movement of the material the feed dog 2 must be in
its highest position for machines with KFA (short thread cutter) 0.8 mm
above the throat plate surface.
–
Turn the handwheel until the feed dog 2 has reached its highest
position.
–
Check the height of the feed dog 2
Correction
–
Turn the handwheel until the feed dog 2 has reached its highest
position.
–
Loosen the screws on the lever 1.
–
Turn the lever 1 so that the feed dog stands 0.8 mm with KFA
(short thread cutter) above the throat plate surface.
–
Tighten the screws on the lever 1.
1