Duerkopp Adler 550-867 Service Instructions Manual page 102

98
Via the ID number the corresponding parameters will be requested
from the data base (here the seam pattern with the number 330).
Note
Three-digit seam patterns are identified with seam pattern numbers
between 100 – 999 (identifying numbers between 001 and 099 are not
admissed.
–
The "Prim. barcode mask L/R" determines whether it is a right or
left-hand seat.
For example:
·
Primary barcode:
(read via hand scanner)
11112233001234567890
·
Primary barcode identification in the field "Prim. barcode mask
L/R":
00000000110000000000
·
ID number:
00
–
The corresponding ID number must be defined in the fields "ID
left" and "ID right".
–
Example with two pieces:
11112233001234567890
"Prim. barcode ident. A":
11110000000000000000
ID number:
1111
The ID numbers are identical = OK.
11112233001234567890
"Prim. barcode ident. B":
00001100000000000000
ID number:
22
The ID numbers are different = OK.
The piece with the ID number 22 is the top layer, the ID number 23 is
the bottom layer.
11112233001234567890
"Prim. barcode ident. C":
00000011100000000000
ID number:
11112333001234567890
11110000000000000000
1111
11112333001234567890
00001100000000000000
23
11112333001234567890
00000011100000000000