Figure 5-4 Configuration Module Installation; Master Configuration Module Replacement - Garmin G600 Maintenance Manual

8. Re-Install GDU 1060/700 in accordance with Section 5.1.6.
NOTE
The GDU will automatically copy the system configuration to the new configuration
module upon the first power-up.
5.1.5

Master Configuration Module Replacement

NOTE
Replacement of the G500/G600 TXi system Master configuration module requires the use
of an Installer unlock card and must be performed by an authorized Garmin Dealer.
Physical replacement of the master configuration module is identical to the configuration module
replacement procedure provided in Section 5.1.4. Following the master configuration module replacement,
the system ID will have changed. Any feature unlocks and databases will need to be re-issued for the new
system ID by a Garmin dealer. To return the system to service from this condition perform the following
steps:
190-01717-B1
Rev. 1

Figure 5-4 Configuration Module Installation

G500/G600 TXi Part 23 AML STC Maintenance Manual
Page 5-8