Decluttering (Dcltr) The Map Pages - Garmin G500 Cockpit Reference Manual

MAP GROUP

Decluttering (DCLTR) the Map Pages

There are four levels of decluttering, DCLTR, DCLTR-1, DCLTR-2, and
DCLTR-3. DCLTR shows the most detail while DCLTR-3 removes most detail.
While viewing Navigation Map 1 or Navigation Map 2 page of the Map Page
Group, press the DCLTR soft key. Each successive press of the DCLTR soft key
will toggle through the declutter levels.
Turning on Map Overlays
While viewing Navigation Map 1 or Navigation Map 2 of the Map Page Group,
press the MAP soft key. Select the Traffi c, TOPO, or Terrain overlays by pressing
the appropriate soft key.
Measuring Distances
1) While viewing Navigation Map 1 or Navigation Map 2 of the Map Page
Group, press MENU.
2) Turn the large MFD knob or the small MFD knob to highlight "Measure
Bearing/Distance" and then press ENT.
3) Turn the large MFD knob or small MFD knob to move the map pointer. The
distance, bearing, and coordinates are displayed at the top of the screen.
Distance, Bearing and Coordinates Display
4) Press ENT to reset the distance and bearing values.
5) Press the small MFD knob to stop measuring.
24 G500 Cockpit Reference Guide
Measuring Map Pointer
190-01102-03 Rev C