Daikin FTXN09KEVJU Operation Manual page 166

EDUS041111_a
1. Prepare the electrical component (this set).
(See Fig. 1)
1) Remove the electrical component cover
of the set.
2) Insert the connection cord into the S21
connector (white) of the set.
3) Route each connection cord through the
cut-out of the set and mount the electrical
component cover to the original position.
4) Insert the connector of the set into the
S403 in the indoor unit electrical
component connector. Then route the
connection cord to the cut-out (cut-out A)
in the indoor unit electrical component.
2. Mount the electrical component cover to
the original position. (See Fig. 2)
3. Mount the set. (See Fig. 2)
1) Mount the set to the electrical component
box of the indoor unit.
2) Route the connection cord as shown in
Fig. 2 (Routing connection cord).
Fig. 2
Install the electrical component cover
in its original position.
Push the electrical component until it
snaps into engagement with the tab.
Room Air Conditioners K-Series
Connecting electrical component (this set)
Fig. 1
Remove the electrical
component cover.
S21
Installing electrical component
Electric component cover
Electrical component
Tab
Preparing the electrical component (this set).
Electrical component
Cut-outs
Disengage
the tab.
Electric component cover
Route each connection
cord through the cut-out.
*1 Connection cord cut-out
Install the electrical component.
Place the connection cord to come
in contact with the protruding part.
Fit in.
Routing connection cord
Optional Accessories
Insert the cord
into the S403.
*1
Route the connection
cord through the cut-out
(cut-out A).
Cut-out A
S403 connection cut-out
Cut-out B
S403 connection cut-out
Cut-out C
Connection cord cut-out
Connection cord
Protruding part
S403 connection cord
Connection cord
3P214218-1
165