Percent Discount (-%) Transactions - Olivetti ECR 5500 Instructions Manual

44

Percent Discount (-%) Transactions

Discounting the Total Sale
You can call up a programmed discount rate during the transaction by
pressing the [-%] key. If a percent discount rate is not programmed, type
in the discount rate before pressing the [-%] key. Up to four digits can be
used for the discount percentage (0-99.99%). You MUST enter two digits
Item price entry after the decimal position.
Manual reduction entry Example: Register a programmed 10% discount to an entire sales
transaction. Compute the change tender.
Multiple item sale
multipled by unit price Proceed as follows:
1. Type [250] and press the [Department 4/12] key.
Resulting total
2. Type [99] and press the [Department 3/11] key.
Multiple item reduction
3. Press the [Sub Total] key to display and print the current balance
Manual reduction entry
due.
Transaction subtotal
4. Press the [-%] key to apply the programmed discount. The amount
Cash tendered discounted is displayed.
Change due
5. Press the [Sub Total] key to display and print the new balance due.
Calculated VAT rates
6. Type the amount tendered [500] and press the [Amt Tend/TOTAL]
key. The change due to the customer is displayed and the transaction
ends successfully.