Home Control - Interlogix ITI Simon Owner's Manual

HOME CONTROL

If any of the HOME CONTROL buttons are pressed and a sen-
sor or module is not associated (programmed) with this fea-
ture the Control Panel will say, Function not available.
CHIME Doors.
Press to cause the Control Panel to beep
when protected doors or windows are opened.
This is a nice feature to use if you're busy in one part of
your home and you want to know when family members
are going in and out of your home.
CHIME Special Motion.
Model)
Press to cause the Control Panel to beep when Motion Sen-
sors detect movement within a specific area. These Motion
Sensors are not used for intrusion protection.
If you have Motion Sensors located in areas such as in a
patio area or at the front door and you want to know when
someone is approaching these areas, you would use this
feature.
LIGHTS Time Activated.
Model)
Press to enable system controlled lights to turn on and off at
scheduled times.
An example is turning your living room lights on at 7 pm
and off at 10 pm.
CODE
HOME
SECURITY
ARM
Doors &
Windows
ARM
Motion
Sensors
DISARM
SYSTEM
STATUS
Test Weekly
6
(Not Included in Basic
(Not Included in Basic
HOME
CONTROL
1 - 2
CHIME
Doors
3 - 4
CHIME
Special
Motion
5 - 6
LIGHTS
Time
Activated
7 - 8
LIGHTS
Sensor
Activated
9 - 0
LIGHTS Sensor Activated.
Model)
Press to have specially programmed sensors turn on lights for
4 minutes when sensors are tripped.
An example is using an outdoor Motion Sensor at the front
door. When the Motion Sensor detects movement it will
cause the light at the front door to turn on.
You may also program the star button on the KeyChain
Touchpad to turn on a light for 4 minutes. The KeyChain
Touchpad star key will always work, even when sensor
activated lights are disabled.
EMERGENCY
Press EMERGENCY for 2 seconds or twice quickly to call the
central monitoring station and notify them of a non-medical
call for help.
If the decal pictured below (shown in gray) is on your panel,
you can press the EMERGENCY button then one of the other
3 buttons (intrusion, auxiliary, or fire) to call the central moni-
toring station or a numeric pager.
EMERGENCY
(Not Included in Basic
8988G12C.DS4