Table of Contents
Advertisement
Alarm System Limitations
Not even the most advanced alarm system can guarantee protection against burglary, fire, or environmental problems.
All alarm systems are subject to possible compromise or failure-to-warn for a variety of reasons.
•
If sirens are not placed within hearing range of persons sleeping or in remote parts of the premises, or if they are placed
behind doors or other obstacles.
•
If intruders gain access through unprotected points of entry or areas where sensors have been bypassed.
•
If intruders have the technical means of bypassing, jamming, or disconnecting all or part of the system.
•
If power to sensors is inadequate or disconnected.
•
If freeze or any environmental sensors are not located in areas where the appropriate condition can be detected.
•
If smoke does not reach a Smoke Sensor. For example, Smoke Sensors cannot detect smoke in chimneys, walls, roofs, or
smoke blocked by a closed door. Sensors may not detect smoke in other levels of the building. Sensors may not warn in
time when fires are caused by smoking in bed, explosions, improper storage of flammables, overloaded electrical circuits,
or other hazardous conditions.
•
If telephone lines are out of service. Telephone lines are also vulnerable to compromise by any of several means.
Inadequate maintenance is the most common cause of alarm failure. Therefore, test your system at least once per week to be
sure sensors, sirens, and phone communications are all working correctly.
Although having an alarm system may make you eligible for reduced insurance premiums, the system is no substitute for insur-
ance.
WARNING!
Security system devices cannot compensate you for the loss of life or property.
Service
If you have any questions about your security system or if you ever need service, please contact your security consultant.
Company Name _____________________
Phone Number _____________________
Address
_____________________
_____________________
15
Advertisement
Table of Contents
