Font Number - Minolta MF3800 Operator's Manual

Set Printer

Font Number

Font Number
1
2
3
4
5
6
Orientation:
Pitch:
Point Size:
Line Number:
Print Fonts:
Paper Size:
6 - 3
Allows users to set various font numbers as listed below. Provides six internal
fonts that remain resident in the machine. They are listed in the following table
by number and size. The machine will use the selected font whenever your
computer does not send an override for a different font. This unit also accepts
download able fonts that are compatible with the HP PCL4 language that are
sent to the printer and then selected by your computer software. Memory
limitations can restrict the variety and size of the downloadable fonts.
Font
Courier
Courier Bold
Line Printer
Courier
Courier Bold
Line Printer
1
Press the PROGRAM Key and scroll
through the menus until you reach the Set
Printer menu and press YES.
2
Press 4 or scroll down to the Font Number
menu and press YES.
3
Enter the number of the font you wish to
have as your default print font. Press YES
to accept this data into memory.
Font Definitions
Portrait text prints across the width of the page.
Landscape text prints across the length of the page.
Font pitch determines the number of characters printed per inch. A pitch of 12, for
example, means that 12 fixed width characters are printed in every inch.
Indicates the height of a font. There are 72 points to an inch.
Sets the number of text lines on a printed page. If your computer software sends
more lines than this setting, they print on a second page.
Prints a list of resident fonts.
The size of the paper in the Second Paper Cassette Unit.
Pitch Point
10 12
10 12
16.6 8.5
10 12
10 12
16.6 8.5
SET PRINTER?
YES / or 1-8
4 FONT NUMBER?
OK=YES
FONT NUMBER=1
OK=YES (DEL=NO)
Orientation
Portrait
Portrait
Portrait
Landscape
Landscape
Landscape
PC Printing & Scanning