Tx Operation; Default Tx - Minolta MF3800 Operator's Manual

TX Operation

TX Operation

Default TX

This function is used to set the default TX mode of the fax unit. Two options are
available:
4 - 27
Choices Available
Memory TX
ADF TX (Direct
Transmission)
Note: In Memory Transmission Mode, you can retrieve your original
document sooner than you can in ADF TX (Direct Transmission) Mode.
1
Press the PROGRAM Key and scroll through the
menus until you reach the TX Operation Menu.
Press YES to begin programming.
2
Press 1 or scroll down to the Default TX menu and
press YES.
3
Using the Left and Right arrows, select the option
you wish to have as the default and press YES to
enter this selection into memory.
Description
When set in this mode, documents are scanned into memory for
transmission and dialing starts after the first pages is scanned (Quick
TX).
When set in this mode, documents are scanned for transmission after
connection has been made to the receiving unit. (When the available
memory is insufficient, please select ADF TX for a successful
transmission)
If line is not available, the message "LINE IS BUSY" will be
displayed. The facsimile will retry based on the number of redial
attempts and intervals that were preset.
TX OPERATION?
YES / or 1-2
1 DEFAULT TX?
OK=YES
*MEM TX ADF TX
-SELECT&PUSH"YES"-
Facsimile Programming