Turning Power On - Minolta MF3800 Operator's Manual

Turning Power ON

Unpacking & Installation
1
Turn the Main ON/OFF
Switch to the ON position.
CAUTION
Allow at least three
seconds after turning the
Main ON/OFF Switch
ON or OFF before
pressing it again.
2
After the power is turned
ON, the fax goes through an
initialization cycle until it is Ready. If not used for a period of time, the fax
unit goes into the Standby mode.
3
If a problem occurs during a transmission causing the lose of system data
or memory, this unit generates a Power Fail Report and emits short
intermittent beeps.
Setting Up Fax Unit
I
O
A - 10