Using Combination Dial - Minolta MF3800 Operator's Manual

Using Combination Dial

Advanced Facsimile
Because the telephone number in each One-Touch and Speed Dial location is
limited to 30 digits, it might be necessary to combine two or more One-Touch or
Speed Dial locations to call one location.
Procedure
1
Select the Original Type, Resolution if
necessary and place your document in the
Document Feeder face down.
2
Press any of the One-Touch or Speed Dial
Keys you have programmed.
3
The following messages appear briefly to
confirm your selection.
4
If the displayed number has a "+" as the
last digit, additional numbers must be used
to dial this locaiton.
5
At this point, you have the option to enter the additional numbers using the
Ten-Key Pad, selecting another One-Touch Key or entering another Speed
Dial number.
6
Enter your selection.
7
To begin transmitting, press START.
Using Combination Dial
NOV.06 15:38
-SET DOC. FACE DOWN-
ONE TOUCH 01
YES / or
ONE TOUCH 01
1234+
12345678
(TX=START)
100%
3 - 12