Pcl4 Emulation; Connecting To A Computer - Minolta MF3800 Operator's Manual

PCL4 Emulation

PCL4 Emulation

Connecting to a Computer

6 - 9
PCL4 emulation provides 300 dpi resolution, which is adequate for printing text.
If you are printing a document that contains several graphics, you might prefer to
use the GDI driver, which provides a higher (600 dpi) resolution or the PCL5e
option. See "GDI Printer Feature" on page 6-12 for details.
Follow these instructions to install the cables.
Never connect or disconnect cables with the power to either unit ON.
1
Close all the open programs on the PC.
2
Be sure power to the computer and the fax unit are OFF.
3
Connect the parallel cable to the parallel connector (bottom port) on the
your unit.
4
Connect the other end of the cables to the parallel port on the PC.
5
Turn power on to both the computer and the fax machine.
Static electricity can degrade your MFD unit operations and/or
damage the unit. When the cable is not connected to your fax unit, cap
the connector to guard against static electricity.
CAUTION
CAUTION
PC Printing & Scanning