Trouble Recovery
EMU29481
Replacing fuse
If the fuse has blown on an electric start
model, remove the electrical cover, open the
fuse holder, and replace the fuse with a new
one of the proper amperage.
EWM00631
WARNING
Substituting an incorrect fuse or a piece
of wire could allow excessive current
flow. This could cause electric system
damage and a fire hazard.
Consult your Yamaha dealer if the new fuse
immediately blows again.
90
4
2
2
1. Electrical cover
2. Fuse holder
3. Fuse (20 A × 2, 30 A × 2)
4. Spare fuse (20 A, 30 A)
5. Fuse puller
1. Fuse puller
EMU29524
Power trim and tilt will not operate
If the engine cannot be tilted up or down with
the power trim and tilt because of a dis-
3
1
5
ZMU04279
1
ZMU04280