3.11 Generator Metering Menu
The generator metering menu displays the generator
voltage and frequency. See Figure 3-12.
Generator ---->
Metering
Figure 3-12 Generator Metering Menu
38
Section 3 RDC2 Controller Operation
Voltage Calibration
The voltage calibration mode can be entered from the
Generator Metering menu. Contact a Kohler-authorized
distributor/dealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-12.
Volts:
123V
Frequency:
12.3 Hz
Reset
Calibration
<---- Return
DANGER
Hazardous voltage.
Will cause severe injury or death.
This equipment must be installed and
serviced
by
qualified
personnel.
Reset
Calib? No
Reset
Calib? Yes
electrical
tp6804
TP-6804 12/11