Generator Metering Menu - Kohler 60RCLA Operation

3.10 Generator Metering Menu

The generator metering menu displays the generator
voltage and frequency. See Figure 3-10.
Generator ---->
Metering
Three-phase
Volts L1--L2:
Volts L2--L3:
Volts L3--L1:
Frequency:
Figure 3-10 Generator Metering Menu
36 Section 3 RDC2 Controller Operation
Single-phase
Volts:
240 V
Frequency:
240 V 60.0 Hz
240 V
60.0 Hz
Reset
Calibration
<---- Return
Voltage Calibration
The voltage calibration mode can be entered from the
Generator Metering menu. Contact a Kohler-authorized
distributor/dealer for service.
The Reset Calibration menu allows you to set the
voltage reading back to the original value after
calibration, if necessary. See Figure 3-10.
240 V
Reset
Calib? No
Reset
Calib? Yes
tp6810
TP-7102 4/18