MAINTENANCE
BELT REPLACEMENT
Tilt the machine on its side (observing the following precautions) and block securely.
NOTE: Do not tilt the machine (KAWASAKI twin cylinder) on its nose as this is where the carburetor is
located. Turn the machine on either its left or right side.
1. Remove pad.
2. Use a suitable wrench to secure the top of the shaft and spin off the pad driver.
3. Remove old belt carefully and completely.
4. Install new belt and adjust the pressure of the tensioner
5. Reinstall pad driver.
RECOMMENDED OIL CHANGE INTERVALS
Do not exceed the 25 hour oil change interval. Oil changes more frequent than 25 hours will give even longer
engine life. In any case, always use 30HD or 10W30 engine oil with all of the following ratings: SF, SG, and CC.
The various engines have different oil sump capacities. Make sure the oil level is maintained at the "FULL" level.
SERVICE SCHEDULE
MAINTENANCE
Change engine oil.
Check pad driver for loose parts.
Check belt for wear or slippage
Check engine pulley for tightness
Check wheel bolts
Check engine mount bolts
Check handle bolts
Check for leakage of engine oil at the
various seals
Return machine to authorized service
center for overall checkup.
3-2
25 HOUR
86343970 18HP LIGHTNING BURNISHER
*
*
*
*
*
*
*
*
200 HOUR
*