Belt Replacement; Solution Pump Replacement - Windsor Cadet CDT7IA Operator Instructions Manual

MAINTENANCE

BELT REPLACEMENT

1. Turn off all switches and unplug machine.
2. Remove recovery tank and brush.
3. Remove the (2) screws that fasten the
solution tank to the frame, and tilt tank back
to expose the inside of the frame.
4. Loosen the (4) screws that hold the brush
motor in place and slide motor forward to
release tension in belt.
5. Remove the (2) screws that fasten the
vacuum shoe links (p/n 86227350 – PRV
NO. 05016) to the brush housing.
!
WARNING:

SOLUTION PUMP REPLACEMENT

1. Turn off all switches and unplug the
machine.
2. Remove recovery tank.
3. Remove the (2) screws that fasten the
solution tank to the frame, and tilt tank back
to expose the inside of the frame.
Pump Head
Pressure Switch
86251040
PRV NO. 65187
PRV NO. 42-809332
Pump Hsng
86288790
PRV NO. 41387
4-3ENG
ONLY QUALIFIED MAINTENANCE PERSONNEL ARE TO PERFORM
THE FOLLOWING REPAIRS.
Pump Replacement Parts for Shurflo 100 psi (86026400-PRV NO. 65254)
86161980
Pump Replacement Parts for Flojet 73 psi (86006110-PRV NO. 65189)
86004600 – PRV NO. 47176
Hsng/Pump Repair Kit
86136040 – PRV NO. 47350
CADET 86038340 04/19/07
6. Remove the (3) screws that fasten the side
plate (p/n 86249420 – PRV NO. 62759) to
the brush housing to remove belt. NOTE: All
components associated with driving the
brush will come out with the side plate.
7. Reverse process to install belt.
4. Remove solution hoses from fittings in
pump.
5. Remove the (2) screws that fasten the
pump to the frame.
6. Reverse process to install pump.
Valve Asm
86258830
PRV NO. 84161
Pump Repair Kit
86249420
PRV NO. 62759
62759
86227350
05016
PRV NO. 05016
Diaphram
86235100
PRV NO. 29206