Cleaning Procedure - Windsor Clipper CLP12 Operator Instructions Manual

1
(30cm)
1in.
(25mm)
2
1ft.
OFF
CLIPPER 86038240

CLEANING PROCEDURE

1. This machine can be operated in either
direction. For smaller areas operate the
machine by pulling rearward.
2.
For larger unobstructed areas, flip the
handle and use the machine's brush
assisted propelling motion.
Start at wall closest to power outlet. For
STEP
small areas, pull straight back without
1
pushing down on handle.
Release intermittent trigger switches or
STEP
turn off continuous setting on solution
2
switch approximately 1 foot before ending
cleaning pass.
Push down on handle to raise vacuum
STEP
shoe and brush before moving to the next
3
cleaning pass. Overlap brush contact
area approximately 1inch.
3-8