Filling Operation; Chemicals - Windsor Clipper CLP12 Operator Instructions Manual

FILLING OPERATIONS
RECOVERY TANK
FILLING THE CLIPPER
NOTE: Use clean bucket of water to fill solution tank
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet.
Dry spillage from top of solution tank before
replacing recovery tank.

CHEMICALS

Suitable Chemicals
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
3-5
SOLUTION
TANK
FILL LINE
Non-Compatible Chemicals
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
STEP
1
STEP
2
STEP
3
STEP
4
CLIPPER 86038240
Remove solution
tank lid
Add water
12 gal.
(45.5 ltr.)
or
140°F (60°C)
12 – 24oz.
(356ml – 711ml)
Add cleaning
chemical
Replace solution
tank lid