Windsor Clipper CLP12 Operator Instructions Manual page 16

OPERATIONS
Adjust handle to comfortable operating
position. Tip machine back by main handle
to move to starting point.
Lower machine to floor.
Select continuous setting to start solution
spray or select intermittent setting to
enable use of trigger switches to start
solution spray.
The intermittent setting requires the
operator to hold any one of the three
trigger switches in the "on" position with the
fingers, and is typically used in small areas
where short cleaning passes are made.
The continuous setting allows the operator
to set the switch in the "on" position with
one touch, and is typically used in large
areas where long cleaning passes are
made.
3-7
STEP
5
STEP
6
STEP
7
CLIPPER 86038240
INT
CONT