Cleaning Procedure - Windsor Clipper CLP12 Operating Instructions Manual

1
1in.
(25mm)
2
1ft.
(30cm)
OFF
CLIPPER 98630 12/14/98

CLEANING PROCEDURE

1. This machine can be operated in either
direction. For smaller areas operate
the machine by pulling rearward.
2. For larger unobstructed areas, flip the
handle and use the machine's brush
assisted propelling motion.
Start at wall closest to power outlet.
STEP
1
For small areas, pull straight back
without pushing down on handle.
Release intermittent trigger
STEP
2
switches or turn off continuous
setting on solution switch
approximately 1 foot before ending
cleaning pass.
Push down on handle to raise
STEP
3
vacuum shoe and brush before
moving to the next cleaning pass.
Overlap brush contact area
approximately 1inch.
10