Filling The Solution Tank - Windsor Clipper Duo Operating Instructions Manual

Filling The Solution Tank

Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet.
Dry spills from top of solution tank.
Use only the suitable chemicals listed below. Using
incompatible chemicals will damage the machine.
Damages of this type are not covered under warranty.
Carefully read ingredients on manufacturer's label
before using any product in this machine.
CHEMICALS
Suitable Chemicals
Non-Compatible Chemicals
Alkalis
Aldehydes
Detergents
Aromatic Hydrocarbons
Hydroxides
SP Butyls
Soaps
Carbon Tetrachloride Clorox*
Vinegar
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
* Product Trademark Names
FILL LINE
86408790 Operator's Manual - Clipper Duo
REMOVE SOLUTION
FILL COVER
ADD WATER
10 Gal.
(38 Lt)
OR
ADD CLEANING
CHEMICAL PER
CHEMICAL LABELING
REPLACE SOLUTION
FILL COVER
Operations
STEP 1
STEP 2
STEP 3
STEP 4
17