Drive Controls; Filling The Voyager; Chemicals - Windsor VOYAGER E Operating Instructions Manual

1
4
3

DRIVE CONTROLS

1. The speed the machine will travel is
regulated by knob located on the controls
which are found on the main handle. Turn
the knob to the right to increase the speed
of the machine.
2. Squeezing one or both of the control levers
will propel the machine forward at the
selected speed.
3. Releasing both control levers will stop the
machine.
4. Pressing forward on the levers moves the
machine backwards at the selected speed

FILLING THE VOYAGER

NOTE: If a bucket is used to fill the tank, be
sure it is clean.
SOLVENTS, SPOTTER OR PRE-SPRAY
CHEMICALS IN THE SOLUTION TANK.
2
DO NOT PUT
DEFOAMER,
86039020 VOYAGER E 08/20/07

CHEMICALS

SUITABLE CHEMICALS
Alkalis
Detergents
Hydroxides
Soaps
Vinegar
D-Limonene@
@When properly
diluted
* Registered
Trademark
NOTE: The internal parts of the pump used
in the extractor are suitable for use with
most carpet cleaning chemicals. However, it
is susceptible to chemical attack from
cleaning substances, such as hydrocarbon
solvents and chlorinated bleaches. These
noncombustible materials are not of the
type normally used for carpet cleaning.
OPERATION
NON-COMPATIBLE
CHEMICALS
Aldehydes
Aromatic Hydrocarbons
SP Butyls
Carbon Tetrachloride
Chlorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone
(MEK)
Perchorethylene (perc)
Phenolics
Trichlorethyelene
3-3