Operation - Windsor Saber Compact 16 SP Service Manual

– The maximum battery dimensions must
be observed.
When charging low-maintenance batter-
ies, the manufacturer's guidelines must
be observed (see maintenance sched-
ule)
Installing the Brushes
The brushes must be installed before the ini-
tial operation (see "Maintenance works").
Installing the Squeegee Tool
Insert the squeegee tool into the squee-
gee tool suspension in such a manner
that the profiled sheet is positioned
above the suspension. Tighten the wing
nuts.
Insert the suction hose.

Operation

Warning!
Risk of damage. Raise the squeegee before
reversing.
Note
To render the brush drive immediately inop-
erational, release the control handle.
Filling in Detergents
Warning
Risk of damage. Only use the recommended
detergents. With respect to different deter-
gents the operator bears the increased risk
regarding the operational safety and danger
of accident. Only use detergents that are
free from solvents, hydrochloric acid and hy-
drofluoric acid.
10
English
Note
Do not use highly foaming detergents. Ob-
serve the dosing notes.
Open the cover of the fresh water reser-
voir.
Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liquid
60°C / 140 °F.
Close the cover of the fresh water reser-
voir.
Driving to the Place of Use
When the running gear is turned to the front
the appliance can be pushed to the place of
use without any contact of the brushes with
the floor.
Raise the squeegee tool.
Press the appliance to the bottom using
the push handle.
Turn the running gear to the front with
your foot.
Use the push handle to push the appli-
ance to the place of use.
Cleaning Programs
3
2
1
1 OFF Appliance is not operational.
2 Scrub cleaning Wet cleaning the floor
and vacuum up dirty water.
3 Wet scrubbing Wet cleaning the floor
and allow the detergent to react.
4 Vacuuming up the detergent solution.
5 Polishing the floor without the application
of liquid.
4
5