Operation; Technical Specifications - Windsor U1500 Operating Instructions Manual

TECHNICAL SPECIFICATIONS

ITEM
CONSTRUCTION
MOTOR
PAD SPEED
ELECTRICAL SYSTEM
115 volts, 60 Hz
230 volts, 50 Hz
CABLE
SWITCHES
WHEELS
HANDLE
DIMENSIONS (L X W X H)
NOTE: Always use a pad, which has been designed for electric ultra high speed burnishing of at
least 2000 rpm.
The sound pressure level at the operator's ear was measured to be 62 dBA. This was a nearfield,
broad-band measurement taken in a typical industrial environment on a tile floor. This appliance
contains no possible source of impact noise. The instantaneous sound pressure level is below 63 Pa.
86309590 (1500) BURNISHER 10/08/08
DIMENSION/CAPACITY/MODEL
Heavy-duty die cast aluminum deck
with heavy-duty rubber bumper,
tubular steel adjustable handle with die
cast aluminum handle housing and belt
driven pad.
1.5 hp
1500 rpm
LB1500, U1500, SPT1500
LB1500IE, LB1500IA
75' [22.9 m]
Dual levers with safety lock
Four 5" (12.7 cm) dia., 1.25" (3 cm)
wide, non-marking tread
1.5" (4 cm) tubular steel, adjustable,
easy to use thumb activated safety
lock
31.5" (80 cm) X 21.5" (54 cm) X 43.5"
(111 cm)

OPERATION

3-1