Hunter 42027-01 Installation And Operating Manual page 12

7 • Completing Your Installation With or Without a Light Fixture (Continued)
Plug
Connector
Cardboard
Step 7-5
Plug
Connector
Detail
12
Step 7-6
Hunter Fan Company
Note: If you do not want to install the light fixture, see
"Uninstalling the Light Fixture" on page 14.
7-5. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
Lower
lower switch housing assembly.
Switch
Housing
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-6. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
Screw
housings. Attach the lower switch housing to the upper switch
housing with three #6-32 x 3/8" housing assembly screws. You will
need to rotate the blade irons out of the way for each screw.
Housing
Assembly
Screw
42027-01 • 12/09/05