Hunter 23347 Installation And Operation Manual
Hunter fan ceiling fan installation and operation manual
Hide thumbs
Also See for 23347:
- Installation manual (1 page) ,
- Installation and operation manual (12 pages) ,
- Parts manual (2 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Installation Manual
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
installation and
operation manual
for Hunter
Ceiling Fans
Model 23347
42832-01 • 06/04/08
Advertisement
Table of Contents
Related Manuals for Hunter 23347
Summary of Contents for Hunter 23347
- Page 1 Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ For reference also attach your receipt or a copy of your receipt to the manual. installation and operation manual for Hunter Ceiling Fans Model 23347 42832-01 • 06/04/08...
-
Page 2: Table Of Contents
7 • Installing the Switch Housing..10 8 • Operating and Cleaning Your Ceiling Fan ......11 9 • Troubleshooting ....12 © 2008 Hunter Fan Company Welcome ®... - Page 3 8 feet high Understanding Mounting Hunter’s patented mounting system provides you maximum ease in installing your fan. This fan was designed to be mounted only on flat ceilings and can be used on ceilings less than 8 feet high. Considering Optional Accessories Consider using Hunter’s optional accessories, including a wall-mounted or remote speed control. To install and use the accessories, follow...
-
Page 4: Getting Ready
Preparing the Fan Site Before you begin installing the fan, follow all the instructions in the pullout sheet called “Preparing the Fan Site.” Proper ceiling fan location and attachment to the building structure are essential for safety, reliable operation, maximum efficiency, and energy savings. 1 • Getting Ready 42832-01 • 06/04/08 • Hunter Fan Company... -
Page 5: Installing The Hanger Bracket
2-2. Partially install two canopy screws in the holes on each end of the hanger bracket, as shown in the figure to the right. 2-3. Your fan comes with four mounting isolators. Position the isolators between the hanger bracket and ceiling by inserting the raised areas on each isolator into the holes in the hanger bracket. -
Page 6: Assembling And Hanging The Fan
WARNING: Make sure the square hanger can not rotate in the metal bracket. Failure to do so could result in the fan falling. 3-3. Install two locking screws through the holes in the side of the metal bracket to secure the square hanger. -
Page 7: Wiring The Fan
CAUTION: Be sure no bare wire or wire strands are visible after making connections. 4-3. Connect the wires as follows: • The green or bare ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the fan • The white (common) power wire from the ceiling to the white wire from the fan • The black power wire from the ceiling to both the black wire from the fan and the black/white wire from the fan 4-4. -
Page 8: Installing The Motor Housing
5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws. 5 • Installing the Motor Housing 42832-01 • 06/04/08 • Hunter Fan Company... -
Page 9: Assembling The Blades
Note: Some blade mounting screws are installed in the motor to secure shipping blocks. 6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Use with grommet... -
Page 10: Installing The Switch Housing
Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 7-6. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws. Note: You can customize your Hunter fan with a number of accessory light kits. 7 • Installing the Switch Housing 42832-01 • 06/04/08 • Hunter Fan Company Steps 7-1 – 7-4 Housing Upper... -
Page 11: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. • Release slowly to prevent the chain from recoiling into the blades. • The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector. 8-3. Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. -
Page 12: Troubleshooting
5. Be sure that the glass is secure. 6. Check and tighten the screws in the switch housing mounting plate and in the upper and lower switch housing. Problem: Excessive wobbling. 1. If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan. 2. Tighten all blade and/or blade iron screws. 9 • Troubleshooting...