Troubleshooting - Hunter 41462-01 Installation And Operation Manual

®

TROUBLESHOOTING

TROUBLESHOOTING
TROUBLESHOOTING TROUBLESHOOTING TROUBLESHOOTING
PROBLEM PROBLEM PROBLEM
PROBLEM PROBLEM
Nothing happens; fan does not move.
Note: Replace with battery type Note: Note:
Note: Note:
23A, MN-21 or equivalent. See STEP
9 - REMOTE CONTROL.
24
PROBABLE CAUSE PROBABLE CAUSE PROBABLE CAUSE
PROBABLE CAUSE PROBABLE CAUSE
1. Power turned off, fuse blown, or
circuit breaker tripped.
2. Loose wire connections or wrong
connections.
3. Remote battery weak or not in-
stalled properly.
4. Shipping bumpers still in place.
5. Dip Switches not set.
6. Fan remote receiver defective.
SOLUTION SOLUTION SOLUTION
SOLUTION SOLUTION
1. Turn power on, replace fuse, or re-
set breaker.
2a.Loosen canopy, check all con-
nections according to STEP 5 -
WIRING THE FAN (turn power
off before checking).
2b.Check the plug connection in the
switch housing according to STEP
8 - ATTACHING THE SWITCH
HOUSING.
3. Install fresh Alkaline battery. See
STEP 9 - REMOTE CONTROL.
4. Remove shipping bumpers.
5. See STEP 9 - REMOTE CONTROL.
6. Replace receiver.
41462-01 10/14/2005