Hunter 41462-01 Installation And Operation Manual page 17

A A A A A TT TT TT TTACHING THE LOWER TT ACHING THE LOWER ACHING THE LOWER ACHING THE LOWER ACHING THE LOWER
SWITCH HOUSING SWITCH HOUSING SWITCH HOUSING SWITCH HOUSING SWITCH HOUSING
1. Place the lower switch housing
assembly over the upper switch
housing. Make sure that the two
wires for the optional light kit
with wire nuts firmly attached,
are completely inside the lower
switch housing.
2. Align the side screw holes in the
upper and lower switch hous-
ings. Attach the lower switch
housing to the upper switch
housing with three #6-32 x 3/8"
housing assembly screws. See
Figure 8c.
41462-01 10/14/2005
2 Wires for
Optional
Light Kit
Housing
Assembly
Screw
Figure 8c - Lower Switch Housing Figur Figur e 8c - Lower Switch Housing e 8c - Lower Switch Housing e 8c - Lower Switch Housing
Figur Figur e 8c - Lower Switch Housing
Installation Installation Installation Installation Installation
INST INSTALLING INST INST INST ALLING ALLING ALLING ACCESSOR ALLING ACCESSOR ACCESSOR ACCESSORY LIGHT ACCESSOR
KITS KITS KITS KITS KITS
To install an optional light kit, replace
the lower switch housing with the
light kit compatible switch housing.
Follow the instructions included with
the light kit for wiring, mounting and
Upper
Switch
assembly. After completing installa-
Housing
tion refer to the fan instructions for
switch housing reassembly.
Lower
The following Hunter Low Profile
Switch
Housing
type light kit models ARE NOT
patible with this fan. DO NOT
the following models.
22498
22898
22909
26122
26126
26130
®
Y LIGHT Y LIGHT Y LIGHT Y LIGHT
ARE NOT ARE NOT
ARE NOT ARE NOT com-
DO NOT DO NOT
DO NOT DO NOT use
26131 27140
26132 27141
26133 27142
26134 27196
26135 28048
26136 29130
17