Table of Contents
Advertisement
HANDLE
ASSEMBLY
HANDLE INSTALLATION
The machine is shipped with handle unassembled.
Follow these steps for installation:
1. Remove handle and deck assembly from
carton.
2. Remove bolt (item 3), washers (item 2), and
nut (item 1) from deck assembly.
3. Install Handle Assembly as shown.
2
1
HANDLE
MOUNT BRACKET
86309600 (2000) BURNISHER 10/08/08
3
DECK
ASSEMBLY
4. Slide Bolt (item 3) through, washers (item 2),
Handle Mount Brackets and Handle Assembly as
shown. Tighten bolt (item 3) and nut (item 1) until
the handle cannot twist in the mount bracket (45-
50 foot pounds).
5. Check handle for movement up and down.
6. Plug cord into handle cord receptacle.
OPERATION
3-2
Advertisement
Table of Contents
