Handle Installation - Windsor MERiT 2000 Operating Instructions Manual

The machine is shipped with handle unassembled.
Follow these steps for installation:
1. Remove handle (38314) and deck assembly
(29261) from carton.
2. Remove bolt (item 3), washers (item 2), and
nut (item 1) from deck assembly (29261).
HANDLE
ASSEMBLY
1
HANDLE
MOUNT BRACKET
2
3
DECK
ASSEMBLY
3. Install Handle Assembly as shown.
4. Slide Bolt (item 3) thru, washers (item 2), Handle
Mount Brackets and Handle Assembly (38314)
as shown. Tighten bolt (item 3) and nut (item 1)
until the handle can not twist in the mount bracket
(45-50 foot pounds).
5. Check handle for movement up and down.
6. Plug cord into handle cord receptacle.
MB2000I 980071 11/15/02

HANDLE INSTALLATION

3-2