Installation Of Battery Cells In Handset; Charging Of The Handset Battery Cells - VTech IP 5825 Manual

Hide thumbs Also See for IP 5825:
Table of Contents

Advertisement

Installation of Battery Cells in Handset

Charging of the Handset Battery Cells

The Handset of your cordless telephone is powered by rechargeable battery cells.
It charges automatically whenever the Handset is in its charger.
You should charge the battery pack for 12 hours when you first receive your
phone. You'll know the battery pack needs charg-
ing when:
• The low battery message is displayed :
• The Handset seems completely dead, the LCD is
completely clear and does not activate when you
press the keys.
IMPORTANT:
1. Do not dispose of battery cell in a fire, the cell may explode.
2. Do not open or mutilate the battery cell. Toxic substances may be released,
causing harm to eyes or skin.
3. Exercise care in handling battery cell in order to prevent an accidental short of
the charge contacts, potentially causing the battery pack to overheat.
4. Do not dispose of this battery cell into household garbage. Please refer to the
information concerning proper battery recycling.
5. Do not charge the battery cell with other electrical device.
Follow the steps below:
1. Place the new battery cells in the
andset with the positive and negative
poles aligned in the battery compart-
ment.
2. Place the battery cover by sliding it
upwards
3. If the new battery cells are not already
charged, place the Handset in its
Charger, and allow it to charge for 12
hours. After initial charge, a mainte-
nance charge of 8 hours should be
sufficient.
8
Setup

Advertisement

Table of Contents
loading

Table of Contents