Getting Started; Battery Charging; Charging Guidelines - VTech KidiZoom Snap Touch Instruction Manual

getting started

When you use the KidiZoom
first time, switch the Master Power Switch to the On
position . When the Master Power Switch is in
the Off position
device or play any activities, and the system clock
will be reset.

Battery cHarging

Note: Adult operation required.
• Make sure the device is not in use and the Master Power Switch is in
the On position
on the side of device.
• Insert the Micro-USB Cable (small end) into the Micro-USB Port on
the device.
• Insert the large end of the Micro-USB Cable into a USB port on a
computer or USB port (Output DC 5V 1A) with Class II or III symbol
or .
• When the battery is charging, you will see the battery charging icon.
• When the battery is fully charged, the screen will turn off. Disconnect
the device from the power source.

cHarging guidelines

To charge the KidiZoom
cable and connect it to a personal computer or USB port (Output DC
5V 1A) with the Class II or III symbol
cable to confirm that it is in good condition and that there are no breaks
or exposed wires. Ensure there are no particles or liquid (water, juice,
etc.) in either of the connectors before plugging in either end of the
cable. The device should be completely dry with no debris in the cable
connectors when charging. Plug in the cable securely, in the correct
orientation. If the device is on when plugged in, a dialog box may open
on your computer to allow you to access the device's drive. Never leave
the device unattended while charging. Do not charge your device on soft
surfaces, as they can trap heat around the device.
Examine the charging cord periodically for conditions that may result
in the risk of fire, electric shock or injury due to damage to the cord,
housing, or other parts. In the event of such conditions, the cord should
not be used until properly repaired or replaced.
Snap Touch for the
®
, it is not possible to charge the
. Pull up the rubber cover over the Micro-USB Port
Snap Touch, use the bundled micro-USB
®
or . Before use, inspect the
8