Installing / Changing The Batteries
1. Slide the battery cover up to open it.
2. Remove the used batteries and insert
new
batteries
compartment as shown, taking care that
the polarities (+) and (-) are correct.
3. Slide the battery cover down to close it.
Use only R6P, LR6 or AA batteries.
CAUTION
Insert the batteries as shown in the battery compartment. If not, the device will not work.
When
(LOW BATTERY mark) blinks on the display, replace all batteries with
new ones. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
(LOW BATTERY mark) does not appear when the batteries are drained.
Battery life varies with the ambient temperature and may be shorter at low
temperatures.
Use the specified batteries only. The batteries provided with the device are for
testing monitor performance and may have a limited life.
Remove the batteries if the device is not to be used for a long time.
The batteries may leak and cause a malfunction.
The stored data are cleared when the batteries are removed.
Connecting The Air Hose
Insert the air connector plug into
the air socket firmly.
Selecting The Correct Cuff
Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The index
and proper fit range, on the cuff, tell you if you are attaching the
correct cuff. (Refer to "Attaching The Arm Cuff" on the next page)
If the index
replacement cuff.
Arm Size
32 cm to 45 cm
22 cm to 32 cm
-
Arm size: The circumference at the biceps.
Note: This UA-767
Using the Monitor
into
the
points outside of the range, contact your local dealer to purchase a
Recommended Cuff Size
Large cuff
Medium cuff
Small cuff
30 monitor is NOT designed for using a small cuff.
battery
Air Connector Plug
English 6
Step 1
Step 3
Air Hose
Air Socket
Order No.
UA-CUFDBKLA-EC
UA-CUFDBKAU-EC
-
Step 2