Using The Monitor; Installing / Changing The Batteries - A&D UB-533 Instruction Manual

1. Installing / Changing the Batteries

1. Remove the battery cover.
2. Remove the used batteries and insert new batteries into the
battery compartment as shown, taking care that the polarities
(+ and -) are correct. Use only LR03 or AAA batteries.
3. Attach the battery cover.
Insert the batteries as shown in the battery compartment.
If installed incorrectly, the device will not work.
When (LOW BATTERY mark) blinks on the display,
replace all batteries with new ones. Do not mix old and new
batteries. It may shorten the battery life, or cause the device
to malfunction.
(LOW BATTERY mark) does not appear when the
batteries are drained.
The battery life varies with the ambient temperature and may be shorter at low temperatures.
Use the specified batteries only. The batteries provided with the device are for testing monitor performance and
may have a limited life.
Remove the batteries if the device is not to be used for a long period of time. The batteries may leak and cause a
malfunction.
When removing the batteries, preset parameters (of clock, user and my C.P.G.) are reset.

Using the Monitor

English 8
Battery cover
Used batteries
New batteries