Operation Mode; Normal Measurement With Storing Data; Recalling Data; Clearing Data - A&D UA-767 Plus 30 Instruction Manual

1. Normal Measurement With Storing Data

Press the START button. Blood pressure is measured and data is stored
within the device. The device can store the last thirty sets of data in
memory automatically.
2. Recalling The Data
Press and hold the START button to recall the
data. The stored data are automatically displayed
in order from the last data.
The device can store the last thirty sets of data
in memory automatically.
3. Clearing The Data
Remove the batteries to clear all data. Re-install them
again.

4. Measurement With The Desired Systolic Pressure

Refer to page 9 for the measurement with a desired systolic pressure.

Operation Mode

English 5
( Refer to page 8)
Press and hold
Data number
Alternation
Stored Data